中文

Products

Location:Home > Products > Merck
Merck

Synergy® Water Purification System

Share:

Back to product list
Detailed introduction

Synergy® systems are designed for laboratories that already have access to purified water and need a point-of-use system to supply ultrapure water.

With the Synergy® range of water purification systems, you benefit from a choice of ultrapure water configurations. All systems produce Type 1 water (18.2 MΩ•cm at 25 °C ultrapure water) on demand from pretreated water. For applications sensitive to organic contaminants, a UV version of the Synergy® system is also available. It incorporates a dual wavelength UV lamp for photooxidation of organic compounds. A final purification step at the point-of-dispense removes specific contaminants critical for your experiments. A range of purification cartridges and Application-Paks is available for you to select according to your requirements.

Simple handling & maintenance

·         Easy installation anywhere in your laboratory with its compact design and optional remote dispenser. Either wall-mounted, on or under the bench, choose the setup that is most convenient for your daily work. 

·         Dispensing adapted to different size laboratory glassware at an instant flow rate of 1.5 L/min. 

·         Save time thanks to the volumetric function. It will automatically deliver the water volume that you requested. 

·         Easily insert your pack in one movement with the patented locking mechanism.

 

Water Specifications

Synergy® ultrapure water (Type 1)

Resistivity at 25 °C

18.2 M•cm

TOC1 (Synergy® system)

≤ 10 ppb

TOC1 (Synergy® UV system)

≤ 5 ppb

Particulates (size > 0.22 μm)2

< 1 particulate/mL

Bacteria (Synergy® system)2

< 0.1 CFU/mL

Bacteria (Synergy® UV system) 3

< 0.01 CFU/mL

Pyrogens (endotoxins)3

< 0.001 EU/mL

RNases3

< 0.01 ng/mL

DNases3

< 4 pg/μL

Flow Rate

> 1.5 L/min

1in the appropriate test conditions
2with Millipak® final filter
3with Biopak® polisher
These values (validated with Elix® feed water) are typical and may vary depending on the nature and concentration of contaminants in the feed water.

Feed water

Feed water quality

Elix®, RiOs™, distilled or DI water with conductivity < 100 μS/cm and TOC < 50 ppb

Feed water connection

½” Gaz M

Feed water pressure *

0 - 0.3 bar

Feed water temperature

5 - 35 °C

* For pressure above 0.3 bar, a pressure regulator needs to be installed upstream of the system; for pressures between 0 and -0.2 bar, the system will operate, but product flow rate may be lower.

System Specifications

Dimensions (H x W x D)

540 x 290 x 380 mm (21.3 x 11.4 x 15 in)

Operating weight (Synergy® systems)

9.7 kg (21.4 lb)

Operating weight (Synergy® UV system)

10.2 kg (22.5 lb)

Operating weight (Remote dispenser)

2.68 kg (5.91 lb)

Electrical power supply voltage

100 - 250 V +/- 10 %

Electrical power supply frequency

50 - 60 Hz +/- 10 %

 

 

YW亚洲AV无码乱码在线观看-黑人上司粗大拔不出来电影-青青草视频免费观看-亚洲国产成人一区二区在线观看